Victron MultiPlus Inverter 12v/24v/48v 800w

NGN 465,500.00

Same Day Delivery

In stock
Victron MultiPlus Inverter 12v/24v/48v 800w

The new style Victron MultiPlus Inverter is set to replace the earlier Victron MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.

DC Voltage: 12v/24v/48v
Output Power: 230v AC
Continuous Power: 500w / 800w / 1200w / 1600w
Peak Power: 900w / 1600w / 2400w / 2800w
Max Efficiency: 90% to 95%
Zero Load Power Consumption: 6w to 10w
Battery Temperature Sensor: Yes
Programable relay (5): Yes
Weight: 4.4kg – 6.4kg – 8.2kg – 10.2kg
Dimensions: 311x182x100mm / 360x240x100mm / 406x250x100mm / 470x265x120mm
Delivery time:  Same day on all orders

For Bulk Orders Call (020) 14536190.

Sales End In:
  • days
  • Hours
  • Minutes
  • Proven reliability:
  • The full bridge plus toroidal transformer topology has proven its reliability over many years.
  • The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
  • PowerControl – Dealing with limited generator, shore side or grid power (800VA/1600VA):
  • With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever
  • is extra for charging, thus preventing the generator or shore supply from being overloaded.
  • PowerAssist – Boosting the capacity of shore or generator power (800VA/1600VA):
  • Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately
  • compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.
  • High start-up power:
  • Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools.
  • Search Mode:When Search Mode is ‘on’, the power consumption of the inverter in no-load operation is decreased by approx. 70%. In this mode the Multi, when
  • operating in inverter mode, is switched off in case of no load or very low load, and switches on every two seconds for a short period. If the output current
  • exceeds a set level, the inverter will continue to operate. If not, the inverter will shut down again.
  • Programmable relay:
  • By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low).
More Information
ManufacturerCollins & Hayes
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account